When you need garage door spring repair in Charleston, IL, it's a good idea to have the technician look at your opener as well because the typical life span of a spring and opener is similar, or often within a year or two of each other. A quality garage door opener typically lasts 10-15 years, which means if it's time for a new opener, you may not be up to date on what the latest options are. The two most common types used on residential doors are overhead openers and wall- or side-mounted openers. Here's what you need to know about how each type of opener works and what the pros and cons of each option are.
Overhead Opener Basics
The most common type of opener that most homeowners are familiar with is the overhead opener. These are the typical openers that are mounted on the garage ceiling, and they have a rail that's attached to a drive mechanism to move the door. Within the overhead opener, there's the option of a belt, chain, or screw drive opening mechanism. Chain drives are typically seen on older overhead opener garage doors because they're durable and cost-effective. A belt has replaced many chain drive openers simply because they create less noise during door operation. The belt is made of fiberglass, reinforced rubber, or polyurethane. A screw drive opener moves the door differently than the other two types. A threaded metal rod moves the door along the track, which means it's usually able to lift heavier loads than a belt or chain drive.
One of the clear pros of an overhead opener is that it's reliable, which is why it's been used for so many years in all types of homes. Any of the different drives used on the overhead openers are easy to install and maintain, and most repairs are simple and inexpensive. They're easy to maintain, especially when you have regular professional maintenance done. These openers come with the latest technology, such as rolling codes, and they're much quieter than older models were.
Wall-Mounted Opener Basics
Wall-mounted openers use a very different approach to operate the garage door. They're installed on one side of the door and are connected directly to the tube that the torsion spring is installed on. The most common type of wall-mounted system is a jackshaft opener because it can be used for any type of garage door. Wall-mounted openers are often used for garages with high, sloped, or cathedral ceilings for both easier installation and maintenance and to allow utilization of storage space above the garage door. A garage with limited garage depth may also benefit from a wall-mounted opener because it doesn't need a certain amount of clearance that a traditional opener requires.
Jackshaft door openers are advantageous when you're trying to save space. At least 48 inches of ceiling clearance is required for overhead openers, but a jackshaft opener doesn't require this space or allows you to use that existing space for storing large items that are difficult to fit in the garage otherwise. Wall-mounted openers are considered more secure because they're more difficult to accidentally disengage so that the door can be opened manually. They're also easier to maintain because they're not as hard to access as an overhead opener. If you need a new opener or garage spring replacement in Charleston, IL, contact Midstate Overhead Doors today.