A garage door that opens or closes slowly can be extremely frustrating, especially because it’s often difficult or impossible to determine on your own what the problem is. Fortunately, the cause could be something as simple as a changed setting or minor maintenance that needs to be done. In other cases, you may need something more substantial like a new garage door opener installation in Mattoon, IL. Here’s what you need to know about the potential causes and solutions for a garage door that’s slowing down.
Determining Something Is Wrong
A good thing to do when you suspect your garage door is opening or closing too slowly is to make sure you’re not just imagining it. Most residential garage doors are designed to move about seven inches every second. This can be hard to gauge, so it’s easier to record the total time it takes for your door to open or close completely. A standard size garage door should be able to fully open or close in about 12-15 seconds. Of course, an oversized garage door will take a few more seconds than this, so you can measure your door to see if it’s the typical seven-foot-high door or larger before timing how long the cycle takes. If it takes 20 seconds or more to complete the cycle, there are a few potential causes to consider.
Cause #1: Wrong Setting
Many homeowners are unaware that there are safety settings that can be programmed in to cause the door to close more slowly. It’s uncommon for the door to accidentally be programmed to open or close more slowly than a regular door, but it’s a good idea to check the owner’s manual to see if that’s a possibility. You can also contact a garage door technician for help changing the setting if you suspect that’s the culprit.
Cause #2: Old Age
An old door can develop numerous problems that could cause the door to slow down when opening or closing. The mechanical components of the door have started to wear out, so they don’t function as well as they once did. You may have bent tracks, worn out rollers, or a torsion spring that’s about to give out. If your door is getting older and it’s been a while since your last garage door inspection, it’s a good idea to have a technician come to inspect the door to see if there are worn out parts that are affecting the door’s ability to move efficiently. In many cases, a simple garage door repair can remedy the problem and get your door moving smoothly again.
Cause #3: Poor Lubrication
Poor lubrication is another common cause of door movement problems. Fortunately, this problem is the easiest and most affordable problem to prevent and take care of. You can choose to lubricate the rollers, tracks, or hinges yourself, but it’s a good idea to get a regular door inspection by professionals to make sure the lubrication is being done properly. Proper lubrication can help the door move more quickly and quietly.
Cause #4: Opener Issues
Finally, your door could be having issues moving up and down because of problems with the automatic opener. Older openers have less horsepower than newer models, and as the opener ages, it can get more difficult to lift the door. In many cases, replacing the opener will result in a much faster cycle.