There are a lot of components of a garage door and automatic opener that work together to allow your door to function smoothly day in and day out. However, over time these components begin to wear out, and in some cases, parts may break completely and need to be replaced. Garage door cable repair in Decatur, IL, is a common repair, so if you suspect your cables need repair, here's what you need to know about fixing them.
Role of the Cable
The garage door cable plays a vital role in supporting the weight of your door. The cable is made of galvanized wires that are twisted into a strong, yet flexible cable. This strength is important because a garage door can weigh hundreds of pounds, but the cable must also be flexible enough to wind around a drum as the door opens. It serves as a safety mechanism because it goes through the torsion spring at the top of your garage door and prevents spring recoil if the spring breaks. When the spring and cable are working correctly, it will prevent damage or injury by keeping the spring from blowing apart dangerously.
Since the cable is made of metal, it's susceptible to rust and other issues, but there are ways to prolong the life of the cable with proper care. You should have a local garage door repair company periodically inspect your door not only to make sure the components are properly lubricated but to ensure there aren't any warning signs to be concerned about. You can also help prevent problems with the cable by keeping it dry and removing any debris, such as leaves, dirt, bugs, or cobwebs.
There are a few reasons something may go wrong with your cables. The main problem with a cable is usually due to a balance issue, which causes the tension between the cable and spring to be upset. When the balance isn't correct, the cable will come unwound. Sometimes this happens because the torsion spring is broken, or it may occur because something impacted the door. It can also occur when the drum is the wrong size for the spring or because of other improper installation issues. In some cases, a cable might come off the track, and it can be replaced and realigned. Other potential problems are caused by wear and tear, such as when the wires fray or snap.
Signs You Need Repairs
The easiest way to tell that you need cable or spring repair is when the door becomes unbalanced. You can sometimes identify an unbalanced door because the door will actually look crooked, or it may be very difficult to open either with the automatic opener or by hand. You can test the balance of the door by releasing the automatic opener and opening the door halfway. A balanced door will stay in place, while a door needing repair will close quickly again. Other signs of cable issues are loose or frayed cables that look to be in poor condition.
Fixing the Cable
It's recommended that you call a professional to fix a broken cable because of the dangerous nature of the job. The tension of the spring can make repairs by an inexperienced homeowner risky, so to avoid injury when attempting to release tension in the springs and to avoid improper repairs, be sure to call Midstate Overhead Doors. We can help with all your repair needs and discuss both the cost of repairs and garage door replacement cost in Decatur, IL.